Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Carburettor on the 2020 Sherco SE 300?

Model: Sherco Se 300
Part: Carburetor

Video tutorial

In this video tutorial, we will see the main steps to disassemble and replace the carburettor on the 2020 Sherco SE 300 enduro bike. First, disconnect the throttle cable; to do this, unscrew the screws of the upper slide, as shown in the video.

Next, disconnect the carburettor from the intake manifold and the air filter box by unscrewing the clamp screws; now remove the fuel hoses to take out and replace the carburettor with the new one. For reassembly, simply follow the video tutorial to the end!


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust Silencer on a Sherco SE 300?
How to Replace the Exhaust Silencer on a Sherco SE 300?
Se 300 To replace the exhaust silencer on the Sherco SE 300, first remove the right side panel, under which you will find the support for the upper part of …
How to Replace the Exhaust on the Sherco SE 300
How to Replace the Exhaust on the Sherco SE 300
Se 300 To replace the exhaust on the Sherco SE 300, loosen the screws that secure the side panel of the bike to access the exhaust underneath: it can be rel…
How to Clean or Replace the Air Filter on a Sherco SE-R 300
How to Clean or Replace the Air Filter on a Sherco SE-R 300
Se 300 In this video, we will see how to clean or directly replace the air filter on the 2017 Sherco SE-R 300 by following these simple steps. First, remove…

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos