Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Rapid
    4. : -board computer

Skoda Rapid - -board computer

Skoda Rapid (2012-2019 / MK 1)
How to reset the multimedia system in the Skoda Rapid?
In this tutorial we can see how to reset the onboard computer in the Skoda Rapid, an extremely simple and quick operation, to be carried out for example as an …read all…
Posted on 23 March 2024 by ScegliAuto
Skoda Rapid (2012-2019 / MK 1)
How to reset the multimedia system in the Skoda Rapid?
In the Skoda Rapid, it is possible for the multimedia system to show various signs of malfunctioning, such as continuous freezes or complete absence of volume. …read all…
Posted on 8 August 2023 by ScegliAuto
Skoda Rapid (2012-2019 / MK 1)
How to reset the tire pressure warning light on the Skoda Rapid
When the low tire pressure warning light comes on on the instrument panel, first of all, check the tire pressure and, if necessary, inflate it if necessary to …read all…
Posted on 10 May 2024 by ScegliAuto
Airbags (2) Car stereo (1) Key (1) Timing belt (1) -board computer (3) Checks and maintenance (11) Cabin air filter (1) Interior lights ceiling light bulb (1) Door panel (1) Fuel pump (1) Instrument cluster (5) Fuse box (4) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos