Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Rapid
  6. : Fuse box

Skoda Rapid - Fuse box

Skoda Rapid (2012-2019 / MK 1)
What is the fuse layout of the Skoda Rapid?

In this video, we can see where the fuse boxes of the Skoda Rapid are located and what their corresponding diagrams are, to consult in case we need to check …read all…
Posted on 24 January 2024 by ScegliAuto
Skoda Rapid (2012-2019 / MK 1)
What is the fuse diagram for the Skoda Rapid?

If the devices in our Skoda Rapid have suddenly stopped working, the first thing we can do is check the status of the corresponding fuses, whose diagrams are …read all…
Posted on 9 December 2023 by ScegliAuto
Skoda Rapid (2012-2019 / MK 1)
What is the fuse diagram for the Skoda Rapid?

In case one or more devices of our Skoda Rapid suddenly stop working, the first thing we can do is check the status of their respective fuses, whose diagrams …read all…
Posted on 29 July 2023 by ScegliAuto
Skoda Rapid (2012-2019 / MK 1)
Where are the fuse boxes of the Skoda Rapid located.

The Skoda Rapid has two fuse boxes: one in the passenger compartment, and one in the engine compartment, like most cars. However, it has the complication of …read all…
Posted on 7 April 2023 by ScegliAuto

Airbags (2) Car stereo (1) Key (1) Timing belt (1) -board computer (3) Checks and maintenance (11) Cabin air filter (1) Interior lights ceiling light bulb (1) Door panel (1) Fuel pump (1) Instrument cluster (5) Fuse box (4) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos