Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headrests from the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

See other generations:
Video tutorial

In this guide, discover the main steps to disassemble and remove the headrests, both front and rear, from the Fiat Panda, as well as other models from the manufacturer. First, get in the vehicle and press the buttons located at the base of the headrest posts; while holding them down, pull the headrests upwards to remove them, as shown in the video.

At this point, reinstall the headrest by lowering it until it clicks and adjust it to the desired height!


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Remove the Headrests from a Fiat Panda
How to Remove the Headrests from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the si…
How to Remove the Headrest from a Fiat Panda?
How to Remove the Headrest from a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To remove the headrest from a Fiat Panda, you need to detach the clips that secure the cover of the backrest at its lower rear part: once the cover i…
How to Remove the Headrest on a Fiat Panda 169
How to Remove the Headrest on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this short video, you will see how to remove the headrest from the front seat of a Fiat Panda 169, second series, in simple and quick steps. To re…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos