Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headrests from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest.

Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests.

Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Remove the Headrest on a Fiat Panda 169
How to Remove the Headrest on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this short video, you will see how to remove the headrest from the front seat of a Fiat Panda 169, second series, in simple and quick steps. To re…
How to Remove the Headrests from the Fiat Panda
How to Remove the Headrests from the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this guide, discover the main steps to disassemble and remove the headrests, both front and rear, from the Fiat Panda, as well as other models fro…
How to Remove the Front Headrest on a Fiat Panda
How to Remove the Front Headrest on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Learn how to remove the front headrest from the seat back of a first model Fiat Panda (if you need to replace it). This video explains how to proceed…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos