Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Localization and diagram of the Skoda Rapid and Fabia and the Volkswagen Vento and Polo.

Model: Skoda Rapid MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

Video tutorial

Let's see where the fuse boxes are located in the Skoda Rapid produced from 2012 to 2019, as well as in the contemporary Fabia, Volkswagen Vento, and Polo. The fuse box inside the cabin is located under the steering wheel, behind a plastic cover. The position is the same for both left-hand drive and right-hand drive vehicles.

The engine compartment fuse box, on the other hand, has two different locations depending on whether it is version 1 (in which case it will be found in a small square-shaped box located above the battery) or version 2 (in which case the same box will be situated between the battery itself and the right outer edge - looking at the vehicle from the front).


Posted on 11 December 2025 by ScegliAuto


Related tutorials

How to Dismantle the Fuel Pump/Floating Unit on the Skoda Rapid 1.2
How to Dismantle the Fuel Pump/Floating Unit on the Skoda Rapid 1.2
Skoda Rapid (2012-2019 / MK 1) In this video, you will discover the steps to dismantle and replace the fuel pump or floating unit on the first series Skoda Rapid with a 1.2 engine,…
How to reset the air conditioning system in the Skoda Rapid?
How to reset the air conditioning system in the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) In this tutorial we can see how to reset the air conditioner in the Skoda Rapid, an extremely simple and quick operation, to be carried out, for exam…
How to Reset the Service on the Skoda Rapid?
How to Reset the Service on the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) Resetting the service on the Skoda Rapid, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure all schedu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos