Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Rapid
    4. : How to disassemble the fuel pump / float on the Skoda Rapid 1.2

Skoda Rapid - Video tutorial

Model: Skoda Rapid MK 1 - Years 2012-2019
Part: Fuel pump
Operation: How to disassemble the fuel pump / float on the Skoda Rapid 1.2

Let's find out in this video the steps that will allow us to disassemble and replace the fuel pump or the floating pump on the Skoda Rapid first series with 1.2 engine, but also on the Fabia. First of all, let's disassemble and remove the rear sofa, lifting it upwards; then remove the pump cover by unscrewing the three screws. At this point we disconnect the fuel pipes and disconnect the electrical connector of the float; unscrew the ring nut with the appropriate wrench or by beating with a flat screwdriver. Remove and replace the fuel pump with the new one!


Posted on 24 May 2024 by ScegliAuto



How to open the fuel door in the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) In this tutorial we can see how to open the fuel door in the Skoda Rapid, a very simple and quick operation. First of all, we open the driver's door,
Skoda Rapid exterior mirror glass replacement
Skoda Rapid (2012-2019 / MK 1) In today's video tutorial we will briefly see how to disassemble and replace the exterior mirror glass on a Skoda Rapid, following these simple instr
What is the fuse diagram for the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) In case one or more devices of our Skoda Rapid suddenly stop working, the first thing we can do is check the status of their respective fuses, whose

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos