Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Roomster
    4. : Cabin air filter

Skoda Roomster - Cabin air filter

Cabin Air Filter Skoda Roomster (2006-2015 / mk 1)

Skoda Roomster (2006-2015 / MK 1)
How to change the cabin air filter of the Skoda Roomster
Let's see how to change the cabin air filter of the Skoda Roomster: it is an operation that is done from the passenger side, so it is convenient to move the …Read all…
Posted on 21 October 2025 by ScegliAuto
Skoda Roomster (2006-2015 / MK 1)
Replacement of Cabin Air Filter
The cabin air filter is located on the passenger side, just beneath the glove compartment: to access the air duct and thus the filter housing, first remove the …Read all…
Posted on 1 March 2026 by ScegliAuto
Skoda Roomster (2006-2015 / MK 1)
Replacement of Cabin Air Filter
The cabin air filter is located on the passenger side. To access it, first remove the soundproof cover situated just above the heel plate. Once the cover is …Read all…
Posted on 26 February 2026 by ScegliAuto
Air conditioning (1) Bushings (1) Air conditioner (2) Onboard computer (1) Checks and maintenance (3) Headlight (1) Fog lights (1) Air filter (1) Cabin air filter (3) Headlight bulb (1) Clock (3) Door trim panel (1) Instrument cluster (1) Fuse box (17) Seat (2) Suspension system (1) AdBlue warning light (1) Warning light – error code (1) Service warning light (23) Tie rods (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos