Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Roomster
    4. : Bushings

Skoda Roomster - Bushings

Skoda Roomster (2006-2015 / MK 1)
Replacement of stabilizer bar rubber pads
The failure of the stabilizer bar rubbers is a fairly frequent defect but it can be solved in a simple and economical way since it is possible to buy only the …read all…
Posted on 12 September 2023 by ScegliAuto
Bushings (1) Air conditioning (1) Checks and maintenance (8) Cabin air filter (2) Headlight bulb (1) Instrument cluster (2) Fuse box (11) Seat (2) Suspensions (1) Steering rods (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos