Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Stabiliser Bar Bushes

Model: Skoda Roomster MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Bushings

Video tutorial

The failure of the stabiliser bar bushes is a fairly common fault that can be resolved simply and economically, as it is possible to purchase just the bushes from the aftermarket. First, lift the vehicle on a ramp and remove the front wheel to gain more working space.

Locate the fixing bolts of the plate that houses the support bush of the bar and remove them to take off the plate. Extract the old bush and insert the new one, lubricating it to facilitate insertion.

Finally, reposition the plate and tighten the respective fixing bolts.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing Headlight Bulb on Skoda Roomster
Replacing Headlight Bulb on Skoda Roomster
Skoda Roomster (2006-2015 / MK 1) Let’s look at removing the headlight bulbs on a Skoda Roomster. Lift the bonnet by pulling the lever located at the bottom right of the dashboard and…
How to Replace the Fan Resistor on a Škoda Roomster?
How to Replace the Fan Resistor on a Škoda Roomster?
Skoda Roomster (2006-2015 / MK 1) To replace the fan resistor on a Škoda Roomster, open the glove compartment and loosen its screws to remove it. Next, detach the cover from the top o…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Skoda Roomster (2006-2015 / MK 1) The cabin air filter is located on the passenger side, just beneath the glove compartment: to access the air duct and thus the filter housing, first …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos