Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Škoda Roomster?

Model: Skoda Roomster MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Blower motor

Video tutorial

To replace the fan resistor on a Škoda Roomster, open the glove compartment and loosen its screws to remove it. Next, detach the cover from the top of the dashboard near the glove compartment to disconnect the underlying connector. You will now have access to the resistor, which should be disconnected and removed from its housing, replacing it with a new spare part.

After replacement, reassemble all removed parts.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seats of the Škoda Roomster
How to Remove the Rear Seats of the Škoda Roomster
Skoda Roomster (2006-2015 / MK 1) To remove the rear seats of the Škoda Roomster, fully lower the backrests by pressing the button located at the top. Once the backrests are lowered, …
How to Reset the Trip Meter on a Škoda Roomster
How to Reset the Trip Meter on a Škoda Roomster
Skoda Roomster (2006-2015 / MK 1) To reset the trip meter on a Škoda Roomster, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is powered on, pr…
Where are the fuses located in the Škoda Roomster?
Where are the fuses located in the Škoda Roomster?
Skoda Roomster (2006-2015 / MK 1) The fuse boxes in the Škoda Roomster contain the fuses that control the operation of the devices installed in the car: in this type of vehicle, you w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos