Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the low beam headlight bulb in the 2018 Skoda Octavia?

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Low beam lights are the most commonly used in all vehicles, during hours with poor natural light, and it is therefore essential that they are always efficient. It is easy to notice when one of them is burnt out, as it is immediately signaled by the appropriate warning light, so all that remains is to proceed with the replacement as shown in this video: Open the hood, unscrew the rear protective cap of the headlight unit, extract the bulb holder and remove the burnt bulb, in order to install the new one. Finally, turn on the instrument panel and low beam lights to verify their operation.


Posted on 6 January 2025 by ScegliAuto


Related tutorials

Replacing the headlight bulb of the Skoda Octavia
Replacing the headlight bulb of the Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) Here are the main instructions to remove and replace the dipped beam bulb of the front headlight of the Skoda Octavia. First, open the bonnet of your…
How to Replace the Headlight Bulb on a Skoda Octavia
How to Replace the Headlight Bulb on a Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) Follow these step-by-step instructions to remove and replace the dipped beam bulb of the front headlight on a Skoda Octavia. First, open the bonnet o…
How to replace the front headlight bulb of the Skoda Octavia
How to replace the front headlight bulb of the Skoda Octavia
Skoda Octavia (2012-2019 / 5E, MK 3) Today we will see the steps that will allow us to disassemble and replace the headlight bulb of the Skoda Octavia. First, we open the hood of the car…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Windscreen Without Damaging the Glass

Removing stickers or tags from your car's glass without damaging the windscreen has always been a problem. Especially if we attach it - as we should - at the top of the windscreen, where the "black dots" are, which is the unshielded part of the windscreen designed for this type of device, whether it be a toll tag, GoPro, cameras, or otherwise. We found this product that seems suitable, specifically designed for this purpose, and it also thoroughly removes dirt, grease, oil, and antifreeze salt from plastic surfaces. You can find it on the ATG website or on Amazon.

Watch the video!


by ScegliAuto

More videos