Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : How to replace the front headlight bulb of the Skoda Octavia

Skoda Octavia - Video tutorial

Model: Skoda Octavia MK 2, 1Z - Years 2004-2012
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Skoda Octavia

Below we will see step by step instructions on how to disassemble and replace the low beam bulb of the front headlight of the Skoda Octavia. First, open the hood of the car and start by releasing the headlight clip to remove it; then disconnect its electrical connector, as shown in the video. At this point, unscrew the cover screws to access the bulb, remove it and replace it with the new one; then reassemble the headlight assembly and make the electrical connection, testing the proper functioning of the low beam bulb!


Posted on 7 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos