Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Skoda Fabia

Model: Skoda Fabia Mark3, NJ - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the front door panel and window regulator mechanism of the Skoda Fabia. First, we open the front door of the car and start by removing the plastic cover of the handle; then we unscrew the fixing screws located underneath and on the sides of the panel, as shown in the video.

At this point, we pry the sides of the panel to detach and remove it, disconnecting the electrical connector and the handle cable; then it is shown how to disassemble the window regulator mechanism!


Posted on 28 January 2025 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of a Skoda Fabia
How to Remove the Front Door Panel of a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Before you start, open the front door of your Skoda Fabia. Begin by prising off and removing the window crank by simply releasing the retaining clip.…
How to remove the front door panel of the Skoda Fabia
How to remove the front door panel of the Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) Today's procedure will show you how to remove the front door panel of the Skoda Fabia in simple steps. First, open the front door of the vehicle and …
Removing the Front Door Panel of the Skoda Fabia
Removing the Front Door Panel of the Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) Today's procedure will show you how to remove and replace the front door panel of the Skoda Fabia. First, open the front door of the vehicle and star…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos