Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the maintenance light on a Skoda Yeti

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

Video tutorial

In today's tutorial, we will see how to reset the maintenance light on a Skoda Yeti. So let's start the procedure by pressing and holding the "0.0" button located in the bottom right of the speedometer, then turning on the car's ignition without starting the engine.

After doing this, we will see a request to reset the oil service on the information display, so we release the button and press ok to confirm the reset.

Finally, we repeat the same operation with the hazard lights on to also reset the inspection and complete the job.


Posted on 12 September 2025 by ScegliAuto


Related tutorials

Resetting the Inspection Warning Light on a Skoda Yeti
Resetting the Inspection Warning Light on a Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) Let’s briefly go through the steps and instructions that will allow you to reset the service light for routine maintenance on a Skoda Yeti in simple …
How to Reset the Service Light on a Skoda Yeti
How to Reset the Service Light on a Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) Today we will discover the steps to reset the service light for routine maintenance on the Skoda Yeti. First, get into the cabin and start pressing a…
How to Reset the Service Light on a Skoda Yeti
How to Reset the Service Light on a Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) These simple steps will show you how to reset the service light for the routine maintenance oil change on the Skoda Yeti. First, get in the vehicle a…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos