Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the lane assist of the Skoda Kodiaq

Model: Skoda Kodiaq MK 1 - Years 2017-2023
Part: Checks and maintenance

Below we will see the instructions that will allow us to activate the lane assist or lane keeping assist of the Skoda Kodiaq, in simple and quick steps. First of all, we get into the car and start the instrument panel; then we go to the vehicle settings on the central display and then to the lane keeping assist option, activating the mode as shown in the video. At this point, we activate the lane assist system once the road conditions are met; it is possible to deactivate the lane keeping assist at any time.

Posted on 24 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Disable Lane Assist on a Skoda Kodiaq?
How to Disable Lane Assist on a Skoda Kodiaq?
Skoda Kodiaq (2024-2026 / MK 2) In this brief guide, you will find instructions to disable the lane assist system on the Skoda Kodiaq in simple steps. First, get into the vehicle an…
Refilling AdBlue in a Skoda Kodiaq
Refilling AdBlue in a Skoda Kodiaq
Skoda Kodiaq (2017-2023 / MK 1) When your Skoda Kodiaq requires AdBlue, refilling is very simple. First, you need to obtain the urea, and an original Skoda 10-litre can costs less t…
How to replace the cabin air filter of the Skoda Kodiaq
How to replace the cabin air filter of the Skoda Kodiaq
Skoda Kodiaq (2017-2023 / MK 1) If it is time to replace the cabin air filter in your first-generation Skoda Kodiaq, then all you have to do is read the following guide and follow t…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos