Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Škoda Octavia?

Model: Skoda Octavia MK 3, 5E - Years 2012-2019
Part: Service warning light

By turning on the dashboard and navigating through the menu displayed, you can begin the reset of the Service light on the Škoda Octavia. You need to press the central button where it says "0.0/SET" until the spanner icon appears on the dashboard display. Once the icon is displayed, turn off the dashboard and then turn it back on. This will allow you to verify that the Service light has been successfully reset, along with the corresponding interval for the service.

Posted on 25 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Škoda Octavia?
How to reset the Service light on the Škoda Octavia?
Skoda Octavia (2012-2019 / MK 3, 5E) On board the Škoda Octavia, to reset the Service light, you need to turn on the instrument cluster so you can navigate within the menu displayed on t…
How to Reset the Service Light on the Škoda Octavia?
How to Reset the Service Light on the Škoda Octavia?
Skoda Octavia (2004-2012 / MK 2, 1Z) On the Škoda Octavia, to reset the Service light, turn on the instrument cluster by rotating the key in the ignition switch: once it is on, scroll th…
How do you reset the Service indicator light on the Škoda Octavia?
How do you reset the Service indicator light on the Škoda Octavia?
Skoda Octavia (2012-2019 / MK 3, 5E) On the instrument panel of the Škoda Octavia, the Service light can be reset by holding down the button located in the center of the instrument panel…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos