Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Octavia
    4. : Removing the Skoda Octavia air vents

Skoda Octavia - Video tutorial

Model: Skoda Octavia 1Z, MK 2 - Years 2004-2012
Part: Air Vents
Operation: Removing the Skoda Octavia air vents

In the following video tutorial we will see how to quickly and easily disassemble the air vents of a Skoda Octavia. First of all, let's get on board the car and equip ourselves with plastic levers or in any case something pointed in order to pry the sides of the vents so that they can be extracted: make the lever vents in several points so that they can be released, as illustrated in the video. We see that our nozzle is held by a cable that we are going to disconnect in order to permanently remove them. For reassembly, just go and put them in place and hook them!


Posted on 18 December 2023 by ScegliAuto



How to recalibrate the air conditioning in the Skoda Octavia?
Skoda Octavia (2012-2019 / MK 3, 5E) In the Skoda Octavia, it may happen that the air conditioner shows signs of malfunction or does not work properly. In these cases, we can try to solv
How to recalibrate the air conditioner in the Skoda Octavia?
Skoda Octavia (2012-2019 / MK 3, 5E) In this tutorial, we can see how to recalibrate the air conditioner in the Skoda Octavia, an extremely simple and quick operation to be performed, fo
How to replace the cabin air filter of the Skoda Octavia 3.
Skoda Octavia (2012-2019 / MK 3, 5E) If you own a Skoda Octavia Mk3 and want to know how to correctly replace the cabin air filter, all you have to do is read the following guide careful

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos