Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Antenna on the Skoda Yeti

Model: Skoda Yeti MK 1 - Years 2009-2017
Part: Antenna

In this video, follow the main steps to remove and replace the radio antenna on a Skoda Yeti in simple steps. First, open the boot and detach the rear part of the headlining; to do this, remove the plastic clip and unclip the side pillars by levering at the sides, as shown in the video. Next, disconnect the antenna's electrical connector, then unscrew the fixing nut; remove the antenna along with its base from the outside, checking the radio's functionality!

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2012 Skoda Yeti?
How to Reset the Service Light on a 2012 Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) If you own a 2012 Skoda Yeti and want to manually reset the service light independently, simply follow the steps outlined in this guide. First, inser…
Replacement of the front headlight bulb of the Skoda Yeti
Replacement of the front headlight bulb of the Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) Let's see the information that will allow us to disassemble and replace the headlight bulb of the Skoda Yeti. First, open the hood of the car and sta…
What is the fuse diagram for the Skoda Yeti?
What is the fuse diagram for the Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) In this video, you can see the fuse diagram for the Skoda Yeti and the location of the boxes, useful if you need to check the fuse of a malfunctionin…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos