Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Yeti
    4. : Removing the front door panel on the Skoda Yeti

Skoda Yeti - Video tutorial

Model: Skoda Yeti MK 1 - Years 2009-2017
Part: Door panel
Operation: Removing the front door panel on the Skoda Yeti

We see in this video the main steps to remove the front door panel on the first series Skoda yeti. First we open the front door and immediately go to remove the plastic cover of the handle, levering the sides; after which we unscrew the screws that we find below, using a torx screwdriver. At this point we unscrew the additional fixing screws that we find on the sides of the panel; we just have to disconnect the electrical connector of the push-button panel to remove it, and then lever the sides of the panel for definitive disassembly!


Posted on 23 February 2024 by ScegliAuto



Skoda yeti removing the door panel
Skoda Yeti (2009-2017 / MK 1) Let's see the disassembly of the door panel of a Skoda Yeti with relative cover pieces. We disassemble the plastics to access the tightening screws.
How to reset the service indicator on the 2012 Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) If you own a 2012 Skoda Yeti and want to proceed with the manual reset of the service light on your own, all you have to do is follow the steps descr
How do I replace the door panel on the Å koda Yeti?
Skoda Yeti (2009-2017 / MK 1) In order to replace the door panel of the Å koda Yeti you have to loosen the screws located under the interior handle, next to the door actuator and

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos