Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Rapid
    4. : How to reset the service on Skoda Rapid.

Skoda Rapid - Video tutorial

Model: Skoda Rapid MK 1 - Years 2012-2019
Part: Instrument cluster
Operation: How to reset the service on Skoda Rapid.

After replacing the engine oil and filter on this car model, we then need to reset the service light on the dashboard. To do this, we have collected all the necessary information and procedure in the following description. Turn off the dashboard. Press and hold the button to the right of the speedometer. Turn on the dashboard. The display will show the message "Service INSP". Release the button and press it again within 20 seconds. Service reset. Finally, turn off and turn on the dashboard to verify that it has been correctly reset.


Posted on 10 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos