Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Rapid
    4. : To reset the service indicator of the Skoda Rapid.

Skoda Rapid - Video tutorial

Model: Skoda Rapid MK 1 - Years 2012-2019
Part: Instrument cluster
Operation: To reset the service indicator of the Skoda Rapid.

To manually reset the service light on your Skoda Rapid, it only takes a few seconds. Let's find out together the steps you need to follow to do it. First of all, enter the car and make sure to start the procedure with the dashboard completely turned off. At this point, locate the "0.0/Set" button in the lower center part of the dashboard and press and hold it. Simultaneously, insert the key and turn on the dashboard. Wait a few seconds and finally release the "0.0/Set" button. Press the button to its left, and the reset procedure is successfully completed.


Posted on 5 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos