Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse box layout and positioning of the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Fuse box

Today we will see the diagram and positioning of the fuse compartments of the Smart Fortwo, in simple and quick steps. First, we open the front door on the driver's side and start removing the plastic panel at the bottom, accessing the internal fuse box; the fuse codes are printed on it. The fuse diagram and chart can be found in the vehicle's owner's manual, where the codes and corresponding amperages are listed; this way it will be easy to replace any faulty fuse (always respecting the amperages).

Posted on 12 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Layout and positioning of the internal fuses of the Smart Fortwo.
Layout and positioning of the internal fuses of the Smart Fortwo.
Smart (1998-2007 / 450) Today's main instructions will show us how to locate the fuse box and how to find the diagram and chart of the Smart Fortwo. First, we open the front…
Layout and positioning of the fuses in the Smart Fortwo.
Layout and positioning of the fuses in the Smart Fortwo.
Smart (1998-2007 / 450) The following steps will show us the layout and positioning of the fuses in the Smart Fortwo. First, we get on board the car, on the driver's side, a…
Fuse box diagram and location for the Smart Fortwo.
Fuse box diagram and location for the Smart Fortwo.
Smart (2007-2015 / 451) In this short guide, we will see the information related to the fuse scheme and positioning of the Smart Fortwo. First, let's get on board the passen…

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Replace the Gear Knob on a Mini

Want to replace the gear knob on a Mini? Follow these steps for the replacement: first, take the knob in your hands and rotate it left and right until you remove it from the gear stick. Use a plastic lever to disconnect the leather gaiter frame (if it needs replacing). For reassembly: fit the new leather gaiter with the clips (if removed), then take the new knob and push it onto the stick in the centre console until it is secured. Finally, test the movement of the stick in the centre console to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos