Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the gear knob on the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Shift knob

In order to replace the gear knob on the Smart 451, it is recommended to use pliers to loosen the fastening mechanism positioned at the base of the knob itself: when this part has been released, it will be possible to completely remove the knob from its seat so that a new spare part can be inserted. Once the new knob has been fixed to the end of the lever, it will be possible to move the lever to verify that this does not cause problems when driving. To fix the knob it will be necessary to fit the mechanism to its base.

Posted on 2 February 2023 by ScegliAuto

Video tutorial

Related tutorials

Engine Won't Start Due to ABS Light, How to Unlock the Gear Lever
Engine Won't Start Due to ABS Light, How to Unlock the Gear Lever
Smart (2007-2015 / 451) The illumination of the ABS light prevents the engine from starting. The fault is likely not related to the ABS device but to a faulty microswitch. T…
How to disassemble the turn signal light of the Smart ForTwo 451
How to disassemble the turn signal light of the Smart ForTwo 451
Smart (2007-2015 / 451) The guide shows how to disassemble the turn signals of the Smart ForTwo 451. To perform the operation properly, it is advisable to use a plastic leve…
Smart Fortwo 451 key battery replacement
Smart Fortwo 451 key battery replacement
Smart (2007-2015 / 451) Today we will see how to open the key remote control and how to replace the internal battery of a Smart Fortwo 451; the operation is very simple and …

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos