Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Chairman
    4. : 1997-2014 (Chairmanh)

SsangYong Chairman Years 1997-2014 (Chairmanh)

SsangYong Chairman (1997-2014 / Chairmanh)
How do you replace the serpentine belt of the Ssangyong Chairman?
To replace the timing belt of the Ssangyong Chairman, you need to open the hood so that you can access the components located inside the engine compartment: on …read all…
Posted on 19 April 2023 by ScegliAuto
SsangYong Chairman (1997-2014 / Chairmanh)
Ssangyong Chairman swing arm replacement
Let's find out in this short and simple guide the main instructions that will allow us to disassemble and replace the swing arm of the Ssangyong Chairman. …read all…
Posted on 7 November 2022 by ScegliAuto
SsangYong Chairman (1997-2014 / Chairmanh)
How to replace the suspension of the Ssangyong Chairman
In this video tutorial we will see how to remove and replace the suspensions, both front and rear, of the Ssangyong Chairman. First of all we lift the car and …read all…
Posted on 11 May 2024 by ScegliAuto
Arm (1) V-belt (1) Suspensions (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos