Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Subaru BRZ key.

Model: Subaru Brz MK 1, ZN6.ZC6 - Years 2012-2023
Part: Key

If you want to replace the battery inside the key of your Subaru BRZ by yourself but do not know the steps to follow, then all you have to do is read the following instructions and put into practice what is described. First of all, locate the button with the word "Push" located on the side of the cover. Press and hold the button in question and at the same time remove the physical emergency key. Immediately after, remove the cover with the help of a flathead screwdriver and proceed with the replacement of the old exhausted battery with a new one (CR1632 model).

Posted on 1 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery in a Subaru BRZ
How to Replace the Key Battery in a Subaru BRZ
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) If you don't know how to replace the button battery in your Subaru BRZ key, don't worry. In this new guide dedicated to you, you will find all the ne…
What is the fuse diagram for the Subaru BRZ?
What is the fuse diagram for the Subaru BRZ?
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) If any devices in your Subaru BRZ suddenly stop working, first check the status of the relevant fuses, as shown in this video. The first fuse box is …
How to Reset the Service Light on a Subaru BRZ
How to Reset the Service Light on a Subaru BRZ
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) To reset the service light on a Subaru BRZ, turn on the instrument cluster by turning the ignition key in the ignition switch: once it is on, you can…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos