Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. : Strom Dl 1050
In this video we see how to reset the service light of the Suzuki Strom DL1050 after performing the maintenance service. We open the passenger seat, find the diagnostic plug and connect the two side pins with a piece of wire. We turn on the instrument panel, with the rocker switch located near the left handlebar, we select the Service option on the display. Press the bottom button to select and then confirm Reset. We confirm by scrolling, always with the down button, the proposed date and mileage, when we reach "Set" we confirm by holding down the button for a few seconds.

Posted on 11 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Suzuki V-Strom 1050?
How do you reset the Service light on the Suzuki V-Strom 1050?
V Strom 1050 To reset the Service light of the Suzuki V-Strom 1050, you need to insert the ignition key into the ignition switch, turn it to start the instrument …
Resetting the Service Light on a Suzuki V-Strom 1050 XT
Resetting the Service Light on a Suzuki V-Strom 1050 XT
V Strom 1050 Today's instructions will guide you through resetting the service warning for the regular maintenance oil change on the Suzuki V-Strom 1050 XT. First…
Resetting the service light on the Suzuki V-Strom 1050
Resetting the service light on the Suzuki V-Strom 1050
V Strom 1050 In this guide we will see the steps that will allow us to reset the regular maintenance (service) warning of the Suzuki V-Strom 1050 motorcycle. Firs…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos