Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's instructions will guide you through resetting the service warning for the regular maintenance oil change on the Suzuki V-Strom 1050 XT. First, place the bike on its stand and remove the rider's seat; disconnect the red connector and bridge the two indicated pins, as shown in the video. Now, turn on the ignition and navigate to the service option, following the guided procedure to confirm and reset the service mileage counter; once completed, reconnect the red connector properly.

Posted on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Suzuki V-Strom 1050?
How do you reset the Service light on the Suzuki V-Strom 1050?
V Strom 1050 To reset the Service light of the Suzuki V-Strom 1050, you need to insert the ignition key into the ignition switch, turn it to start the instrument …
Resetting the service light on the Suzuki V-Strom 1050
Resetting the service light on the Suzuki V-Strom 1050
V Strom 1050 In this guide we will see the steps that will allow us to reset the regular maintenance (service) warning of the Suzuki V-Strom 1050 motorcycle. Firs…
How to Set the Clock on the Suzuki V-Strom 1050
How to Set the Clock on the Suzuki V-Strom 1050
V Strom 1050 Here’s how to adjust the clock on the display of the Suzuki V-Strom 1050 instrument cluster. First, place the bike on its stand and turn on the instr…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos