Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Suzuki GSX 150?

Model: Suzuki Gsx S 150

Video tutorial

To change the engine oil of a Suzuki GSX 150, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil cap from the top of the engine.

Then, place a collection container under the oil drain plug, usually located at the bottom of the engine. Use an appropriate spanner to unscrew the oil drain plug and allow the old oil to drain completely into the container.

Once the oil has fully drained, refit the oil drain plug. Now, remove the oil filter using an oil filter wrench.

Clean the mounting surface of the filter thoroughly and apply a bit of new oil to the seal of the new filter. Install the new oil filter.

Finally, fill the engine with new oil through the oil filler until you reach the recommended capacity, checking the level with the dipstick.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to Replace Engine Oil and Oil Filter on Suzuki GSX-S 150
How to Replace Engine Oil and Oil Filter on Suzuki GSX-S 150
Gsx S 150 In this video, we will see how to perform routine maintenance by replacing the engine oil and oil filter on a Suzuki GSX-S 150. First, position the c…
How to Change the Oil in a Suzuki GSX-R 150
How to Change the Oil in a Suzuki GSX-R 150
Gsx S 150 In today's video, learn how to replace the engine oil and the corresponding filter in the Suzuki GSX-R 150. First, ensure the engine is cold to avoid…
How to change the engine oil in the Suzuki GSX-S 750?
How to change the engine oil in the Suzuki GSX-S 750?
Gsx S 150 This tutorial shows how to change the engine oil in the Suzuki GSX-S 750, a very simple and quick operation. First, ensure the engine is sufficiently…

How to Replace the Headlight Bulb on the MV Agusta Brutale 800RR?

To replace the headlight on the MV Agusta Brutale 800, you need to loosen the screws that secure the corresponding optical unit: these screws will be located on the sides and underneath the headlight. Once the screws are removed, you can extract the optical unit from its housing and disconnect the connector located inside; at this point, you can remove the bulb inside so that you can insert the new one. The headlight can now be secured with the appropriate screws to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos