Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the service light on the 2018 Suzuki GSX S 750 motorcycle, we need to turn on the instrument panel and press the MODE button located on the instrument panel itself. By holding down the button for a few seconds, the mileage menu will be displayed, then release the button and press again until setting the next service mileage. Restart the instrument panel once the operation is completed to complete the reset of the light. If the light is not reset, it is necessary to go to the workshop to perform a diagnosis using a computer and OBD port.

Posted on 16 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the exhaust on a Suzuki GSX-S 750?
How to replace the exhaust on a Suzuki GSX-S 750?
Gsx S 750 To replace the exhaust on the Suzuki GSX-S 750, loosen the screws that secure the exhaust terminal to its housing, located on the right side of the b…
How to Replace the Clutch on the Suzuki GSX-S 750
How to Replace the Clutch on the Suzuki GSX-S 750
Gsx S 750 To replace the clutch on the Suzuki GSX-S 750, you need to unscrew the bolts securing the cover on the right side of the bike, allowing the cover to …
How to replace the headlight bulb on the Suzuki GSX-S 750?
How to replace the headlight bulb on the Suzuki GSX-S 750?
Gsx S 750 In this tutorial, we will see how to replace the headlight bulb on the Suzuki GSX-S 750, a process that is extremely simple and quick. First, let's m…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos