Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. : Gladius

How do you set the clock on the Suzuki Gladius?

Model: Suzuki Gladius
Part: Clock

Video tutorial

It will be possible to adjust the clock of the Suzuki Gladius by turning on the instrument panel, inserting the ignition key into the corresponding slot: once the panel has been turned on, it will be possible to press repeatedly the button on the top left of the instrument panel until the clock setting appears.

It will be necessary to hold it down until the hours start flashing and can then be adjusted by pressing the button on the bottom repeatedly; then you can press the top button again to switch to adjusting the minutes by following the same procedure.


Posted on 3 August 2025 by ScegliAuto


Related tutorials

How do you set the clock on the Suzuki V-Strom 650?
How do you set the clock on the Suzuki V-Strom 650?
V Storm 650 In order to adjust the clock of the Suzuki V-Strom 650, you will need to turn on the instrument panel by turning the key in the ignition switch. Once…
How to adjust the clock of the Suzuki Ignis
How to adjust the clock of the Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Let's see how to adjust the clock of a Suzuki Ignis. In this vehicle there are two clocks to be adjusted separately: one on the dashboard and one on …
How to Set the Clock on the Suzuki Burgman 125
How to Set the Clock on the Suzuki Burgman 125
Burgman 125 To set the clock on the Suzuki Burgman 125, turn the ignition key in the ignition switch to power on the instrument panel. Once the panel is on, pres…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos