Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the transmission oil of a Suzuki DRZ 400?

Model: Suzuki Drz 400
Part: Engine oil

Video tutorial

To change the gearbox oil on a Suzuki DRZ 400, start by positioning the bike on a stable stand, making sure it is well balanced. Find the gearbox oil drain plug under the engine, on the left side of the bike.

Place a container under the plug to collect the used oil. Use an appropriate wrench to loosen the drain plug and let the old oil completely drain out. Once the crankcase is empty, tighten the drain plug ensuring it is securely fastened. Next, locate the oil fill hole, usually located on the side of the engine.

Pour in the new oil, being careful not to exceed the recommended level. Make sure there are no oil leaks, then tighten the fill plug.

Finally, start the bike and let the engine run for a few minutes, then turn it off and check the oil level again.


Posted on 20 August 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlight on a Suzuki DRZ 400?
How to Replace the Front Headlight on a Suzuki DRZ 400?
Drz 400 This tutorial shows how to replace the front headlight on a Suzuki DRZ 400, a very simple and quick operation. First, ensure that the instrument clus…
How to Replace the Battery on the Suzuki DRZ 400
How to Replace the Battery on the Suzuki DRZ 400
Drz 400 To replace the battery on the Suzuki DRZ 400, loosen the screws that secure the side panels on the left side of the bike, just below the seat. Once t…
How to Replace the Exhaust on a Suzuki DRZ 400?
How to Replace the Exhaust on a Suzuki DRZ 400?
Drz 400 To replace the exhaust on the Suzuki DRZ 400, you need to loosen the screws that secure the right side panel of the rear mudguard of the bike: once t…

How to Replace the Headlight Bulb on the MV Agusta Brutale 800RR?

To replace the headlight on the MV Agusta Brutale 800, you need to loosen the screws that secure the corresponding optical unit: these screws will be located on the sides and underneath the headlight. Once the screws are removed, you can extract the optical unit from its housing and disconnect the connector located inside; at this point, you can remove the bulb inside so that you can insert the new one. The headlight can now be secured with the appropriate screws to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos