Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust of the Suzuki GSX-S 125, you need to loosen the screws that secure the exhaust terminal to its seat so that it can be completely removed: once the exhaust has been loosened, you can widen the ring located between the exhaust and the exhaust manifold. By doing this, you can insert the new exhaust terminal into its housing near the rear wheel, securing it with the appropriate screws on the supports and then connecting the exhaust using the corresponding connecting clamp.

Posted on 30 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Gsx S 125 .. the engine oil and oil filter on the Suzuki GSX-S 125. First, position the stand on the bike and start by loosening the oil drain bolt located under.. …
Gsx S 125 In this tutorial, we will see how to set the time on the Suzuki GSX-S125, a very simple and quick operation to perform, for example, after disconnect…
Gsx S 125 In this tutorial, see how to change the engine oil in a Suzuki GSX S125, a very simple and quick operation to perform every 12 months. First, ensure …

How to Replace the Spark Plug on the Sym CruiSym 300

In this short and simple guide, you will learn how to remove and replace the engine spark plug on the Sym CruiSym 300, following the instructions below. First, place your scooter on the centre stand and begin by removing the under-seat compartment to access the upper part of the engine. Then, disconnect the spark plug connector, using a socket wrench with an extension to unscrew and remove it, as shown in the video. At this point, install the new spark plug of the correct type and thread pitch, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos