Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Bandit 1250
Part:

In this guide, you will see the steps to remove and replace the fuel tank of the Suzuki Bandit 1250. First, place the motorcycle on a stand and begin by removing the rider's seat by unscrewing the fixing screws; then remove the screws of the tank found both at the top and bottom, as shown in the video. At this point, disconnect the pipe located at the bottom and the electrical connector of the fuel level sensor; replace or repair the fuel tank with the new one, reassembling everything.

Posted on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Suzuki Bandit 1250?
How do you replace the air filter of the Suzuki Bandit 1250?
Bandit 1250 In order to replace the air filter of the Suzuki Bandit 1250, you need to loosen the screws that secure the motorcycle seat to its housing: once thes…
Changing the Engine Oil and Oil Filter of the Suzuki Bandit 1250
Changing the Engine Oil and Oil Filter of the Suzuki Bandit 1250
Bandit 1250 Let’s briefly see how to perform the routine maintenance service by changing the engine oil and oil filter on the Suzuki Bandit 1250. First, place th…
How do you replace the exhaust pipe of the Suzuki Bandit 1250?
How do you replace the exhaust pipe of the Suzuki Bandit 1250?
Bandit 1250 In order to replace the exhaust pipe of the Suzuki Bandit 1250, you need to loosen the screws that secure the exhaust terminal to its housing, next t…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos