Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Rmz
Part: Engine oil

Descriptive guide for replacing the engine oil and oil filter on a 2013 Suzuki RMZ 250. Obtain 1 litre of Suzuki SAE 10W40 oil and a K&N KN-207 oil filter. Position the bike on a central stand. Place a container for oil disposal under the engine. Start the engine and let it warm up, then turn it off. Using a ratchet and a 13mm socket, unscrew the two oil drain plugs located under the engine and let it drain. Using a ratchet and a 10mm socket, unscrew the two screws located on the side of the oil filter cover, on the right side of the engine. Remove the filter cartridge and clean the housing thoroughly. Insert the new filter in the same position as the old one. Screw the cover and the two drain plugs back on. Unscrew the oil filler neck located on the right side of the crankcase and pour in the oil. The manufacturer specifies 950ml for oil only, and 1000ml with filter replacement.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in a Suzuki RMZ?
How to Replace the Air Filter in a Suzuki RMZ?
Rmz To replace the air filter in a Suzuki RMZ, loosen the screws located on the side of the seat, corresponding to the side panels of the bike. Once thes…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos