Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Suzuki
  4. : Gsx S 1000 Gt

How to replace the coolant in the Suzuki GSX-S 1000 GT

Model: Suzuki Gsx S 1000 Gt
Part: Key

Video tutorial

Let’s discover the main steps that will allow you to replace the engine coolant in the Suzuki GSX-S 1000 GT. First, place the motorcycle on a stand and begin removing the lower plastic fairing; then disconnect the clip of the coolant hose connected to the radiator, allowing the fluid to drain into a container for about ten minutes.

At this point, reconnect the hose, topping up with the new antifreeze; fill until reaching the maximum level mark on the reservoir.


Posted on 15 June 2026 by ScegliAuto


Related tutorials

Gsx S 1000 This guide shows you how to drain and refill the antifreeze in the Suzuki GSX-S 1000 in simple steps. First, place your motorcycle on a stand and sta…
Gsxr 1000 In this video, we will see how to bleed and replace the coolant or antifreeze on the Suzuki GSX-R 1000. First, remove the coolant bleed hose by loose…
Gsxr 1000 Discover in this guide how to remove and replace the coolant or antifreeze in the Suzuki GSX-R 1000 motorcycle. First, remove the side fairing of you…

How to Change the Engine Oil on the BMW K1600?

To carry out the engine oil change on the BMW K1600, you need to loosen the drain plug of the oil sump, which is located at the central bottom of the vehicle: once this plug has been unscrewed, you can collect all the used oil in a suitably positioned container. At this point, you can remove the oil filter from its housing on the right side of the bike; after removal, you can top up through the breather located on the right side of the bike. Once topping up is complete, ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos