Do it yourself
Frequently asked questions about cars and motorcycles

Model: Suzuki Gsr 600
Part: Brake pads

In today's video, you will see instructions on how to remove and replace the front and rear brake pads of the Suzuki GSR 600. First, put your bike on a stand and start by removing the brake caliper by undoing the two fixing screws; once removed, you can take out the pads found inside, as shown in the video. At this point, clean the caliper of any dirt; then press the piston to retract it, making it easier to insert the new pads. Finally, replace all the other brake pads in the same way!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Gsr 600 In this video tutorial, learn how to remove and replace the front brake pads on a Suzuki GSR 600. First, use a socket spanner to remove the bolts fro…
Gsr 600 Watch this video to learn how to remove and replace the front brake pads on the Suzuki GSR 600 motorcycle by following these simple steps. First, uns…
Gsr 600 In this tutorial, you will see how to replace the engine oil in the Suzuki GSR 600, an extremely simple and quick operation. First, ensure the engine…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos