Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Sv 650
Part:

In today's tutorial, you will learn the steps to remove and replace the gear lever on the Suzuki SV 650 by following these simple instructions. First, place the bike on its stand and start by removing the small retaining pin or metal clip found on the gear lever; this allows you to take off the lever, being careful with the small washer, disconnecting it from the shaft. At this point, install the new gear lever of the correct type; then, reattach the lever to the shaft and make the necessary adjustments!

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Suzuki SV 650S
How to replace the front headlight bulb of the Suzuki SV 650S
Sv 650 Today's instructions will show us the process of disassembling and replacing the headlight bulb of the Suzuki SV 650S motorcycle. First, we put the m…
Disassembly of the front wheel of the Suzuki SV 650S
Disassembly of the front wheel of the Suzuki SV 650S
Sv 650 Today's instructions will show us how to disassemble and replace the front wheel of the Suzuki SV 650S motorcycle. First, we put the motorcycle on th…
How to Replace the Windscreen of the Suzuki SV 650S?
How to Replace the Windscreen of the Suzuki SV 650S?
Sv 650 To replace the windscreen of the Suzuki SV 650S, loosen the screws that secure it to its housing: these screws are located at the front of the bike, …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos