Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, discover how to remove and replace the engine air filter on a Suzuki Bandit 650. First, place the motorcycle on a stand and start by removing the rider's seat; then, unscrew the fastening screws of the fuel tank, located at the top and bottom, using a star or socket wrench, as shown in the video. Next, unscrew the screws of the air filter cover and extract the filter from the box; replace it with the correct new one, applying the reverse procedure for reassembly!

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the fuel tank from a Suzuki Bandit 650
How to remove the fuel tank from a Suzuki Bandit 650
Bandit 650 Today's guide will show you the steps to remove and replace the fuel tank on a Suzuki Bandit 650 motorcycle. First, place your bike on a stand and st…
How to Replace the Front Brake Pads on the Suzuki Bandit 650
How to Replace the Front Brake Pads on the Suzuki Bandit 650
Bandit 650 In this video tutorial, you will learn how to disassemble and replace the front brake pads on the Suzuki Bandit 650 motorcycle in simple steps. First…
How to Change the Engine Oil of a Suzuki Bandit?
How to Change the Engine Oil of a Suzuki Bandit?
Bandit 650 To change the engine oil of the Suzuki Bandit, access the central lower part of the bike where the oil drain plug is located. Unscrew this plug to co…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos