Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will guide you on how to bleed and replace the coolant or antifreeze in the Suzuki GSR 600 motorcycle. First, place your motorcycle on a stand and start removing the plastic fairing on the sides of the fuel tank. Then, unscrew the screws of the tank to lift it, as shown in the video. At this point, unscrew the bleed screw found on the water pump cover, allowing the old fluid to drain into a container. Finally, unscrew the radiator cap and top up, filling to the correct level!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cooling liquid of the Suzuki GSR 600
Replacement of the cooling liquid of the Suzuki GSR 600
Gsr 600 The instructions provided in this guide will show us how to replace the coolant or antifreeze of the Suzuki GSR 600. First, we put the motorcycle on …
Replacing the Front Headlamp Bulb on a Suzuki GSR 600
Replacing the Front Headlamp Bulb on a Suzuki GSR 600
Gsr 600 In this tutorial, you will learn how to remove and replace the front headlamp bulb on a Suzuki GSR 600. First, unscrew the side fixing bolts of the h…
How to Replace the Brake Pads on the Suzuki GSR 600
How to Replace the Brake Pads on the Suzuki GSR 600
Gsr 600 In today's video, you will see instructions on how to remove and replace the front and rear brake pads of the Suzuki GSR 600. First, put your bike on…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos