Do it yourself
Frequently asked questions about cars and motorcycles
To replace the rear brake pads on the Suzuki V-Strom, loosen the bolts securing the brake caliper to the corresponding disc. Once these bolts are removed, detach the caliper from the disc and slide out the existing pads. After removing the old pads, insert the new ones into the caliper, positioning it back onto the disc. Finally, secure it by tightening the appropriate fixing bolts that were previously removed.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

V Storm 650 .. To replace the front brake pads on the Suzuki V-Strom 650, loosen the bolts securing the brake caliper to the brake disc. Once the caliper is freed from.. …
V Storm 650 .. To replace the stator on the Suzuki V-Strom 650, loosen the bolts securing the cover on the left side of the bike. Once this is removed, you.. …
V Storm 650 .. To replace the exhaust of the Suzuki V-Strom 650, you need to loosen the screws that secure the protective plastic panel located near the exhaust.. …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos