Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the bulbs on the Suzuki GSR 600, first remove the screws and take off the plastic covers located on either side of the front headlamp. Then, unscrew all the other bolts indicated in the video, which are accessible only after removing the two side plastics. Disconnect the headlamp from the motorcycle using your hands and unplug the central connector. Remove the protective cap and extract the bulb. Insert a new bulb in its place and reposition all the various parts accordingly. Caution: Do not touch the glass of the bulb with your fingers.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cooling liquid of the Suzuki GSR 600
Replacement of the cooling liquid of the Suzuki GSR 600
Gsr 600 The instructions provided in this guide will show us how to replace the coolant or antifreeze of the Suzuki GSR 600. First, we put the motorcycle on …
Replacing the Front Headlamp Bulb on a Suzuki GSR 600
Replacing the Front Headlamp Bulb on a Suzuki GSR 600
Gsr 600 In this tutorial, you will learn how to remove and replace the front headlamp bulb on a Suzuki GSR 600. First, unscrew the side fixing bolts of the h…
Engine Oil and Oil Filter Replacement on a Suzuki GSR 600
Engine Oil and Oil Filter Replacement on a Suzuki GSR 600
Gsr 600 In this video, you will see how to disassemble and replace the engine oil and oil filter on a Suzuki GSR 600. First, position the bike on the stand a…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos