Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Here’s how to remove and replace the spark plugs on the engine of a Suzuki GSX-R 750, following the instructions below. First, place the motorcycle on a stand and remove the rider's seat, then take off the fuel tank. To do this, unscrew the fastening screws located at the top and bottom, disconnect the fuel line and the electrical connector. Next, disconnect the four electrical connectors from the spark plugs, using a socket wrench with an extension to unscrew and remove the plugs. Install the new plugs, ensuring they have the same thread pitch!

Updated on 1 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Spark Plugs on a Suzuki GSX-R 750
How to Replace the Spark Plugs on a Suzuki GSX-R 750
Gsx R 750 .. the spark plugs of the engine on a Suzuki GSX-R 750 motorcycle. First, place your bike on a stand and start by removing the passenger seat and the.. …
How to replace the front headlight bulb of the Suzuki GSX-R 750
How to replace the front headlight bulb of the Suzuki GSX-R 750
Gsx R 750 .. bulb of the front headlight of the Suzuki GSX-R 750. First of all, we put the motorcycle on the stand and start unscrewing the screws that secure the.. …
How to Remove the Front Wheel of the Suzuki GSX-R 750
How to Remove the Front Wheel of the Suzuki GSX-R 750
Gsx R 750 .. the front wheel or tyre of the Suzuki GSX-R 750, as well as the GSX-R 600. First, place the motorcycle on a stand and lift the front wheel off.. …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos