Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Replacing the front headlamp bulb on a Suzuki Smash 115 scooter, as shown in this tutorial, is an extremely simple and quick task. First, ensure the key is not inserted, then remove both mirrors, unscrew all the indicated fixing screws, and by pulling it towards the front of the scooter, separate the front fairing from the handlebars. Next, disconnect the power connector, remove the old bulb from the housing, and insert the replacement. To reassemble, simply follow the reverse procedure.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Suzuki Smash 115 Scooter
How to Replace the Front Headlight Bulb on a Suzuki Smash 115 Scooter
Smash 115 As seen in this tutorial, replacing the front headlight bulb on a Suzuki Smash 115 scooter is an extremely simple and quick operation. First, ensure …
How to Change the Engine Oil on a Suzuki Smash 115 Scooter
How to Change the Engine Oil on a Suzuki Smash 115 Scooter
Smash 115 In this tutorial, you can see how to change the engine oil on a Suzuki Smash 115 scooter, a very simple and quick operation. First, ensure that the e…
Replacing the Brake Light Bulb on Suzuki Smash 115
Replacing the Brake Light Bulb on Suzuki Smash 115
Smash 115 Hello! Today, you will learn how to replace the rear light and the brake light bulb. First, get a cross-head screwdriver and remove the two screws fr…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos