Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Engine Oil Warning Light on the Suzuki Burgman 200

Model: Suzuki Burgman 200
Part: Service warning light

Video tutorial

Briefly follow the steps to reset the service warning light for the engine oil change on the Suzuki Burgman 200 scooter. First, place the scooter on its centre stand and press and hold the button located on the left side of the instrument panel; then turn on the instrument panel, waiting for the service light to flash until it turns off completely, as shown in the video.

At this point, turn off the instrument panel and start the engine, ensuring that the service light has been reset on the instrument panel!


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Suzuki Burgman 200
How to Reset the Oil Light on the Suzuki Burgman 200
Burgman 200 If you have just changed the oil on your Suzuki Burgman 200 but the warning message continues to appear on the instrument cluster, follow this manual…
How to replace the rear brake pads on a Suzuki Burgman 200?
How to replace the rear brake pads on a Suzuki Burgman 200?
Burgman 200 To replace the rear brake pads on a Suzuki Burgman 200, loosen the bolts that secure the brake caliper to the corresponding disc: once these bolts ar…
How to Replace the Drive Belt of the Suzuki Burgman 200
How to Replace the Drive Belt of the Suzuki Burgman 200
Burgman 200 Here are the steps to remove and replace the drive belt of the Suzuki Burgman 200 scooter. First, place the scooter on the centre stand and begin uns…

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos