Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Seats from Suzuki Jimny

Model: Suzuki Jimny Jb43, Jb53, Jb33, Jb23 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Seat

See other generations:
Video tutorial

Today, you will see the main steps to remove the rear seats from a Suzuki Jimny. First, open the tailgate and grab a crosshead screwdriver to unscrew all the screws found inside, specifically at the bottom, both at the back and at the front, as shown in the video.

At this point, remove the screws for the seat belts (including the bolt located at the top, hidden under the cover) and take out the rear seats by pulling them out of the car. For reassembly, apply the reverse procedure of disassembly!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to transform the Suzuki Jimny into a bed
How to transform the Suzuki Jimny into a bed
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) Well yes, you read that right, as stated in the title it is possible to transform the Suzuki Jimny into a bed. To carry out this operation, it is nec…
Removing the Rear Seats from Suzuki Jimny
Removing the Rear Seats from Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) To remove the rear seat cushion, pull upwards with force while shaking the cushion slightly. It is a single cushion, not two or three separate ones, …
How to remove the partition grid of the Suzuki New Jimny
How to remove the partition grid of the Suzuki New Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) To remove the partition grille of the Suzuki Jimny, we need to open the trunk and the front doors of the vehicle. Immediately after, we recline both …

How to Enter the Unlock Code for the Radio in the Nissan Micra?

In this tutorial, you will see how to enter the unlock code for the radio in the Nissan Micra, a very simple operation to perform in case of memory loss after replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. First, turn on the instrument panel, then repeatedly press the "1" button until you reach the first digit of the code. Follow the same logic to enter the remaining 3 digits using the "2", "3", and "4" buttons, and confirm the entry with the up arrow button.

Watch the video!


by ScegliAuto

More videos