Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the partition grid of the Suzuki New Jimny

Model: Suzuki Jimny Jb74w, Jb64w - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Grille

See other generations:
Video tutorial

To remove the partition grille of the Suzuki Jimny, we need to open the trunk and the front doors of the vehicle. Immediately after, we recline both front seats to have more space during the removal procedure of the grille.

We unscrew the four nuts located at the corners of the grille using a socket wrench. We lift the grille and remove it by pulling it outward.

We screw the screws back onto the brackets so we don’t lose them and reposition the seats. To install the grilles, we need to follow the steps in reverse.

Once the process is complete, we close the trunk of our vehicle.


Posted on 29 January 2026 by ScegliAuto


Related tutorials

How to Fit Roof Bars on a Suzuki Jimny
How to Fit Roof Bars on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Before you can begin, you need to exit the cabin of your Suzuki Jimny. Start by removing the plastic inserts located at the upper corners of the roof…
Where is the fuse box of the Suzuki Jimny engine located?
Where is the fuse box of the Suzuki Jimny engine located?
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) In order to access the fuse box located inside the engine compartment of your first series Suzuki Jimny, you must follow all the steps described in o…
How to Replace the Lambda Sensor in the Suzuki Jimny?
How to Replace the Lambda Sensor in the Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) To replace the lambda sensor in the Suzuki Jimny, open the bonnet to access the engine bay: here you will locate the lambda sensor on the right side …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos