Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Front Bumper Grille on the Suzuki Jimny

Model: Suzuki Jimny Jb74w, Jb64w - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Grille

See other generations:
Video tutorial

Today, follow these instructions to remove and replace the front bumper grille on the Suzuki Jimny. First, open the bonnet of the vehicle and start unscrewing all the fixing screws found at the top and bottom of the grille, also removing the plastic clips.

Then, gently pry on the sides to detach and remove it, disconnecting the wiring for the indicator lights as shown in the video. At this point, install the new front bumper grille, transferring the indicator lights from the old grille to the new one.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bumper Grille on a Suzuki Jimny
How to Replace the Front Bumper Grille on a Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) This guide provides the main instructions on how to remove and replace the front bumper grille on a Suzuki Jimny. First, open the bonnet of your car …
How to remove the partition grid of the Suzuki New Jimny
How to remove the partition grid of the Suzuki New Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) To remove the partition grille of the Suzuki Jimny, we need to open the trunk and the front doors of the vehicle. Immediately after, we recline both …
How to Remove the Front Bumper on a Suzuki Jimny
How to Remove the Front Bumper on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Before starting, open the front bonnet of your Suzuki Jimny. Begin by prying out and removing the clips that secure the bumper to the chassis using a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos