Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper Grille on a Suzuki Jimny

Model: Suzuki Jimny Jb64w, Jb74w - Years 2018-2026
Part: Grille

This guide provides the main instructions on how to remove and replace the front bumper grille on a Suzuki Jimny. First, open the bonnet of your car and disconnect the electrical connector found behind the bumper grille; then, use a thin plastic lever to remove the clips located at the top of the bumper, as shown in the video. At this point, remove the bumper grille and replace it with the new one; secure it properly and reassemble everything, following the video tutorial to the end!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly and replacement of the front bumper grille of the Suzuki Jimny.
Disassembly and replacement of the front bumper grille of the Suzuki Jimny.
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) Today we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Suzuki Jimny. As a first step, we ope…
Replacement of the front headlights of the Suzuki Jimny
Replacement of the front headlights of the Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) The following steps will show us the process of disassembling and replacing the front lights of the Suzuki Jimny. First, we open the hood of the car …
How to Remove and Replace the Front Headlamps on a Suzuki Jimny
How to Remove and Replace the Front Headlamps on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Follow the steps below to remove and replace the front headlamps on a Suzuki Jimny, following the instructions provided. First, open the bonnet and b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos