Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Suzuki Jimny

Model: Suzuki Jimny Jb43, Jb53, Jb33, Jb23 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Front bumper

See other generations:
Video tutorial

Before starting, open the front bonnet of your Suzuki Jimny. Begin by prying out and removing the clips that secure the bumper to the chassis using a thin but sturdy tool.

Next, unscrew and remove the screws and bolts that hold the bumper in place. Once all screws and bolts are removed, the bumper will be free.

At this point, pull it out and disconnect the internal electrical plugs. After completing this last step, you can fully remove the bumper, and the disassembly is finished.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Bumper Grille on a Suzuki Jimny
How to Replace the Front Bumper Grille on a Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) This guide provides the main instructions on how to remove and replace the front bumper grille on a Suzuki Jimny. First, open the bonnet of your car …
Removal and Replacement of the Front Bumper Grille on the Suzuki Jimny
Removal and Replacement of the Front Bumper Grille on the Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) Today, follow these instructions to remove and replace the front bumper grille on the Suzuki Jimny. First, open the bonnet of the vehicle and start u…
Replacing the Front Headlamps on the Suzuki Jimny
Replacing the Front Headlamps on the Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) The following steps will guide you through the procedure for removing and replacing the front headlamps on the Suzuki Jimny. First, open the bonnet o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos